Introduction:
Wireless charging has become a popular feature in smartphones, and Samsung S6 is no exception. However, most wireless chargers available in the market are generic and may not meet your specific needs. In this guide, we will walk you through the process of creating a custom wireless charger for your Samsung S6.
Materials Required:
– A wireless charging coil
– A USB cable
– A soldering iron
– Solder wire
– A multimeter
– A 3D printer (optional)
Step-by-Step Guide:
Step 1: Disassemble the Wireless Charging Coil
The first step is to disassemble the wireless charging coil. You can purchase a wireless charging coil online or salvage one from an old charger. Once you have the coil, carefully take it apart using a screwdriver. You should be left with a flat coil and a circuit board.
Step 2: Solder the USB Cable
The next step is to solder the USB cable to the circuit board. Cut the USB cable in half and strip the wires. You should see four wires: red, black, green, and white. Solder the red wire to the positive terminal on the circuit board and the black wire to the negative terminal.
Step 3: Test the Circuit
Before proceeding further, use a multimeter to test the circuit. Connect the multimeter to the USB cable and check for continuity. If everything is working correctly, you should get a reading of around 5 volts.
Step 4: 3D Print the Case
If you have access to a 3D printer, you can print a custom case for your wireless charger. You can find a variety of designs online or create your own. The case should be designed to fit the wireless charging coil and the circuit board.
Step 5: Assemble the Wireless Charger
Once you have the case and the circuit board ready, it’s time to assemble the wireless charger. Place the wireless charging coil in the center of the case and secure it with hot glue. Then, place the circuit board on top of the coil and secure it with hot glue.
Step 6: Test the Wireless Charger
The final step is to test the wireless charger. Plug the USB cable into a power source and place your Samsung S6 on the wireless charging coil. If everything is working correctly, your phone should start charging wirelessly.
Conclusion:
Creating a custom wireless charger for your Samsung S6 is a fun and rewarding project. With a little bit of effort, you can create a charger that meets your specific needs and style. Follow the steps in this guide, and you’ll have a custom wireless charger in no time.
If you’re tired of using a standard charging cable for your Samsung S6, why not create your own custom wireless charger? It’s easier than you might think, and you’ll have a unique charging station that’s perfect for your needs. Here’s a step-by-step guide to help you get started.
Step 1: Gather Your Materials
To create your custom wireless charger, you’ll need a few materials. These include a wireless charging receiver for your Samsung S6, a wireless charging transmitter, a USB cable, a soldering iron, and some soldering wire. You can find these materials online or at your local electronics store.
Step 2: Disassemble the Transmitter
Once you have your materials, it’s time to start building your charger. Begin by disassembling the wireless charging transmitter. You’ll need to remove the outer casing and locate the coil inside.
Step 3: Solder the Receiver
Next, you’ll need to solder the wireless charging receiver to the USB cable. To do this, strip the wires on the USB cable and the receiver, and then use your soldering iron and wire to connect them together.
Step 4: Connect the Receiver to the Transmitter
With the receiver and transmitter both prepared, it’s time to connect them together. Place the receiver on top of the transmitter’s coil, and then use some tape to hold it in place.
Step 5: Test Your Charger
Once you’ve connected everything together, it’s time to test your custom wireless charger. Plug the USB cable into a power source and place your Samsung S6 on top of the charger. If everything is working properly, your phone should begin charging wirelessly.
Step 6: Customize Your Charger
Now that you have a working wireless charger, you can customize it to your liking. Consider painting the outer casing, adding decorations or stickers, or even building a custom stand to hold your phone while it charges.
Creating your own custom wireless charger is a fun and rewarding project that can save you the hassle of using a standard charging cable. With this step-by-step guide, you’ll be able to build your own charger in no time.