Wireless chargers have become increasingly popular in recent years, and for good reason. They provide a convenient way to charge your phone without having to deal with tangled cords or broken charging ports. If you’re a Samsung S6 user looking to create your own custom wireless charger, this comprehensive guide will walk you through the process.
Step 1: Gather Your Materials
To create your own wireless charger, you’ll need the following materials:
– A wireless charging receiver coil for Samsung S6
– A wireless charging transmitter (such as a Qi wireless charging pad)
– A soldering iron
– Solder
– Heat shrink tubing
– Electrical tape
Step 2: Disassemble the Wireless Charger
Start by disassembling the wireless charging transmitter. You’ll need to remove the cover and locate the charging coil inside. Be sure to take note of the polarity of the coil.
Step 3: Prepare the Charging Receiver Coil
Next, you’ll need to prepare the wireless charging receiver coil for Samsung S6. This involves soldering wires onto the coil’s terminals. Be sure to follow the manufacturer’s instructions carefully.
Step 4: Solder the Charging Receiver Coil to the Transmitter
Once the charging receiver coil is prepared, you’ll need to solder it to the charging transmitter. This involves connecting the positive and negative terminals of the coil to the corresponding terminals on the transmitter. Again, be sure to follow the manufacturer’s instructions and take note of the polarity.
Step 5: Insulate the Connections
After the soldering is complete, you’ll need to insulate the connections to prevent any short circuits. This can be done by covering the connections with heat shrink tubing and using electrical tape to secure it in place.
Step 6: Test the Wireless Charger
Before reassembling the wireless charger, it’s important to test it to ensure that it’s functioning properly. Place your Samsung S6 on the charging pad and make sure that it’s charging as expected.
Step 7: Reassemble the Wireless Charger
Once you’re satisfied that the wireless charger is working correctly, you can reassemble the charging transmitter. Be sure to secure the cover in place and test the charger once more to confirm that everything is still working as expected.
Conclusion
Creating your own custom wireless charger for Samsung S6 is easier than you might think. With the right materials and a little bit of know-how, you can create a convenient charging solution that’s tailored to your needs. By following the steps outlined in this comprehensive guide, you’ll be well on your way to enjoying the benefits of wireless charging.
Wireless charging has revolutionized the way we charge our smartphones. With the Samsung S6, you can charge your phone wirelessly using a wireless charging pad. However, if you want to create a custom wireless charger for your Samsung S6, this comprehensive guide will help you.
Materials Needed:
– Samsung S6 charging coil
– Wireless charging transmitter
– Soldering iron
– Solder wire
– Wires
– Multimeter
– Power supply
– Enclosure
Step 1: Disassemble the Samsung S6 charging coil
The first step is to disassemble the Samsung S6 charging coil. The charging coil is located at the back of the phone, near the camera lens. Use a screwdriver to remove the screws that hold the back cover in place. Once you have removed the back cover, you will see the charging coil.
Step 2: Remove the charging coil
Use a soldering iron to remove the charging coil from the phone. Be careful not to damage the coil or any other components on the phone. Once you have removed the charging coil, set it aside.
Step 3: Prepare the wireless charging transmitter
The wireless charging transmitter is the device that will transmit power to your Samsung S6. You can buy a wireless charging transmitter online or at an electronics store. Follow the instructions that come with the transmitter to prepare it for use.
Step 4: Connect the charging coil to the transmitter
Use wires to connect the charging coil to the wireless charging transmitter. Use a multimeter to test the connections and ensure that they are working properly.
Step 5: Test the wireless charger
Connect the wireless charging transmitter to a power supply and place your Samsung S6 on the charging pad. Your phone should start charging wirelessly. If it does not, check the connections and try again.
Step 6: Enclose the wireless charger
Once you have confirmed that the wireless charger is working properly, enclose it in an enclosure. This will protect the wires and components from damage.
In conclusion, creating a custom wireless charger for your Samsung S6 is not as difficult as it seems. With the right materials and tools, you can create a wireless charger that is both efficient and convenient. Follow the steps outlined in this comprehensive guide, and you will have a custom wireless charger for your Samsung S6 in no time.